Pigtail Fiber Access Terminal Optic Splitter Box

SJ-OTB-SY-02 24 Cores Fiber Optic Termination Box

SJ-OTB-SY-02 Fiber optic termination box suits for jointing fibers with fiber pigtail and it protects fiber optic splices and helps to distribute. SJ-OTB-SY-02 Fiber optic termination box is either a wall-mounting type or desktop type, which is mainly used in the telecommunication equipment room and network equipment room.
Size:26.5X15.5X5.5CM
Max capacity: 24 cores

Applicable fiber cables:
SJ-OTB-SY-02 Fiber optic termination box suitable for splicing one piece of fiber cable with max. Diameter Ø16mm and two portions of fiber cable with max. Diameter Ø 11mm; or 2 parts of fiber cables with diameter Ø16mm.
 
 Features:
(1). The structure of SJ-OTB-SY-02 Fiber optic termination box is innovative, designed in up-down bisection. Its installation is simple. By untightening one piece of fixing nut, it succeeds in opening the housing, and it allows fiber cable and fiber pigtail to pass in and out in the single side.
(2). The house of SJ-OTB-SY-02 Fiber optic termination box is made of high strength polycarbonate plastic materials, which has mechanical strength; therefore it is reliable and long-lasting. It is of excellent shape and beautiful appearance.
(3). The tray is designed in SLIDE-IN-LOCK, and its opening angle is above 90o. Therefore it is easy for installation and maintenance. The curved diameter meets with the international standard. The capacity of the tray is 6-12 cores.
(4). The elastic material is used to fix fiber pigtail. When the end of fiber pigtail cannot be determined (it is not used for the moment), it is possible to wind fiber pigtail into the clasp. Whenever it is needed, the active connector could be installed outside of the housing. Therefore it can connect termination equipment without connecting adapters.
 
Main points during operation:
(1).  While stripping fiber cable, reserve reinforced core with 35mm length. (it is used for the distance from fixing point of fiber cable to fixing device of the reinforced core)
(2). Reserve fiver with a protective coat in 100mm or so (it is used for the distance from fixing point of fiber cable to fixing point of FOST)
(3). After splicing, the initial round of spliced fiber is proposed to put along the inner
(4). Edge of the tray and the rest bending as round with diameter not less than Ø 80mm
(5). Inside the tray,  Fiber pigtail could be winded on clasp outside of FOST.

Sijee was established in 2002. Our factory is located in Ningbo, the exact address is No.20 Chuangxin East Road, Liyang Town, Ningbo, Zhejiang, with the factory area of more than 28,000 square meters. Sijee's products have passed the ISO9001 , GB/T24001-ISO14001, and GB/T28001-2001, Sijee has also established an environmental management system and occupational health/safety management system. Sijee won bids several times within many years from China Mobile, China Telecom, China Unicom's procurement projects. Some products were exported to Europe and America, Southeast Asian countries.

Sijee has a talented and professional team engaging in sheet metal case/cabinet processing, urban facilities, communication equipment research and development, design, manufacture, and sales. Sijee, as a relatively large domestic telecommunications equipment and distribution products and plate metal case/cabinet suppliers, focuses on providing service to domestic and foreign operators, large domestic listed companies and radio and television bureaus to provide first-class products and FTTx overall solutions.    

Sijee Telecom Communication products include: Dome Fiber Optic Splice Closure, Fiber Cable Joint, FOSC Fiber Optic Joint Box, Fiber Cables Enclosures, Compact Fiber Optical Splice Closure Box, FTTH Splice Closure, Fiber Optic Splice Joint Closure, Plc Splitter/ Plc Splitter Box/Juction Box Fiber Odf Optic Closure, Small Fiber Optic Splice Closure, FTTH Optical Fiber Cable Joint Closure, Fiber Optical Distribution Box, FTTH Fiber Optic Socket Face Plate, Fiber Optic Patch Panel, ODF Optical Fiber Distribution Frame, OCC Optical Fiber Cross Connection Cabinets, Network Cabinet, Equipment Enclosure, PLC Splitter, Patch cord, Adaptor, FTTH Accessories, etc.

Sijee Equipment Enclosure includes all kinds of Equipment Enclosure, wall mounting enclosure, junction box, network box, electrical enclosure box, stainless steel enclosure, electronic equipment racks, metal cabinets, metal enclosure CATV enclosure, etc.    

Sijee has a first-class sheet metal equipment workshop, and a special sheet metal product design department, the workshop has large laser cutting machines, CNC punching machines, CNC bending machine, CNC shears, robot automatic welding lines, automatic bending machine, variable pump injection molding machine with different tonnages, a number of standard assembly lines, with a strong sheet metal design and processing capacity, Sijee provides more than 800,000 various sheet metal cabinets and over 100 Million sets of fiber optic splice closures to domestic operators annually.

Sijee is equipped with a full set of advanced testing and test equipment and specialized testing laboratories. Sijee has good after-sales service, and always pursues the "quality to win the trust, honesty to pursue development" business philosophy to meet customer needs at best, as our unremitting efforts to the goal.