Fibre Optic Distribution Box 1X16 PLC Splitter

SJ-FTTH-SK19-1   Fibre Optic Distribution Box 1X16 PLC Splitter

 Fibre Optic Distribution Box 1X16 PLC Splitter is able to hold up to 24 splicing points as closure. It is used as a splicing closure and a termination point for the feeder cable to connect with drop cable in FTTX network system. It integrates fiber splicing, splitting, distribution, storage and cable connection in one solid protection box.

Specification:

Photos of SJ-FTTH-SK19-1:

Features:

1. Total enclosed structure, Clamping for feeder and drop cable;
2. Material: PC+ABS, wet-proof, water-proof, dust-proof, anti-aging, protection level up to IP65;
3. Clamping for feeder cable and drop cable, fiber splicing, fixation, storage, distribution...etc all in one;
4. Cable, pigtails, and patch cords are running through their own paths without disturbing each other, easy maintenance;
5. Distribution panel can be flipped up, feeder cable can be placed by expression port, easy for maintenance and installation;
6. Box can be installed by the way of wall-mounted or poled-mounted, suitable for both indoor and outdoor use;
7. Easy operation and installation;
8. Rotatable and dis-mountable splice tray for easy splicing.

Applications:

1.Wall mounting and pole mounting installation; 
2.FTTH pre-installation and filed installation; 
3.Protection Rating IP-65. Moisture-proof, anti-aging;
4.Integrated with flap-up splice cassette and adaptor holder;
5.Fiber bend radius control more than 40mm;
6.Suitable for the fusion splicer or mechanical splice;
7.3Pcs of 1*8 Splitter can be installed as an option; 
8.Mechanical sealing structure and mid-span cable entry.

Environmental requirement:
1.Working temperature: -40℃～+85℃;
2.Relative humidity: ≤85% (+30℃);
3.Atmospheric pressure: 70KPa~106Kpa;
4.Thunder-proof technical data sheet;
5.The insulation resistance between the grounding device and the metal parts of the box is no less than 2MΩ/500V (DC); IR≥2MΩ/500V;
6.The voltage resistance between the grounding device, and the box and its metal parts is no less than 3000V (DC)/min, no puncture, no flashover; U≥3000V.