Fiber Optic Breakout Box 12 Cores

SJ-OTB-SY-01   Fiber Optic Breakout Box 12 Cores

Fiber Optic Breakout Box 12 Cores suits for jointing fibers with fiber pigtail and it protects fiber optic splices and helps to distribute. It is either a wall-mounting type or desktop type, which is mainly in telecommunication equipment room and network equipment room.    

Specification:

Photos of SJ-OTB-SY-01:

Features：
1.The structure of SJ-OTB-SY-01 is innovative, designed in up-down bisection. Its installation is simple. By untightening 2 pieces of fixing nut, it succeeds in opening the housing and it allows fiber cable and fiber pigtail to pass in and out in single side.    
2.The housing case of SJ-OTB-SY-01 is made of well-chosen steel plate and processed in standard size by moulding with good performance in mechanical strength. The case surface is electrostatic powder coated. It affords good appearance and durable using.   
3.The Splice Tray is designed in SLIDE-IN-LOCK and its opening angle is above 90°. Therefore it is easy for installation and maintenance. The curved diameter meets with the international standard. The capacity of tray is 6-12 cores. 

Main points during operation：                                        

1.While stripping fiber cable, reserve reinforced core with 35mm length.(It is used for the distance from fixing point of fiber cable to fixing device of reinforced core)         
2.Reserve fiver with protective coat in 360mm or so.(It is used for the distance from fixing point of fiber cable to fixing point of the tray) 
3.After splicing, the initial round of spliced fiber is proposed to put along the inner edge of the tray and the rest bending as round with diameter not less than Ø 80mm inside the tray.