Small Compact Fiber Optical Splice Closure Box

SJ-Small Small Type Fiber Optical Splice Closure box

1.The Parts of Splice Tray

A.Splice Module with 4 Cable ties 2.4 X 92mm

B.Splice Organizer

C.Box Size:230×185×85mm L×W×D

2.Installation Procedure:

2.1 Cable Preparation

(1)Cable Sequentially through Sealing Nut, Sealing Claws, Seal and through the Closure Bottom Case, allow appropriate fiber lengths for placement within the Splice Tray.

(2)Tighten the Sealing Nut, and then proceed with stripping of fiber cable inside the Closure Bottom Case.

(3)Repeat steps(1)and(2)until cable preparation is complete.

2.2 Cable Fixation

(1)Loosen the Sealing Nut,adjust cable to the appropriate length, and tighten the Sealing Nut to fix cable in place.

(2)Repeat step(1)for rest of the cable to complete this procedure.

Caution:

(1)For non-functional entrance ports, brown solid plugs provided are to be used with the sealing assembly to ensure a good seal.

(2)Solid plugs should protrude the outer edge of the Sealing Nut by 1-3mm for a complete seal.

2.3 Fiber Placement and Splicing

(1) Use Cable Ties to fix the fiber-containing PVC soft tubing onto the Splice Tray, and fix the Splice Organizer onto the Splice Tray.

(2) Place fiber within the Splice Tray, made sure fiber lengths are correct for splicing work and placement after splicing.

(3)After each individual fiber pair is spliced, place the splice joint onto the grooves of the Splice Organizer and the extra fiber on and around the Splice Tray.

(4) After all splicing work is complete, coat the grooves on Splicing Organizer with a layer of silicon gel for protection of splicing joints.

2.4 Closure Assembly

(1)After placing all splice fibers within Splice Trays, put the transparent Splice Tray Cover over the topmost Splice Tray, and use the Fixing O-Ring to fix the cover and the Splice Trays.

(2) Fix the Un-leaking O-Ring on the appropriate groove of the Closure Bottom Case, and place the Upper Closure over the bottom case, and then tighten the 8 sets of closure assembly screws to complete closure assembly.

(3)Perform a final seal tightness check for:

(4)Sealing Nuts on entrance ports (non-functional ports should have solid plugs in place of cable)

(5)8 Sets of closure assembly screws.

2.5 Opening the Closure

(1) Before opening, clean all closure surfaces.

(2) Follow procedure 2.4 in reverse order to open the closure. After necessary work is completed, follow procedure 2.4 to reassemble the closure.

Sijee was established in 2002. Our factory is located in Ningbo, the exact address is No.20 Chuangxin East Road, Liyang Town, Ningbo, Zhejiang, with the factory area of more than 28,000 square meters. Sijee's products have passed the ISO9001 , GB/T24001-ISO14001, and GB/T28001-2001, Sijee has also established an environmental management system and occupational health/safety management system. Sijee won bids several times within many years from China Mobile, China Telecom, China Unicom's procurement projects. Some products were exported to Europe and America, Southeast Asian countries.

Sijee has a talented and professional team engaging in sheet metal case/cabinet processing, urban facilities, communication equipment research and development, design, manufacture, and sales. Sijee, as a relatively large domestic telecommunications equipment and distribution products and plate metal case/cabinet suppliers, focuses on providing service to domestic and foreign operators, large domestic listed companies and radio and television bureaus to provide first-class products and FTTx overall solutions.    

 Sijee Telecom Communication products include: Dome Fiber Optic Splice Closure, Fiber Cable Joint, FOSC Fiber Optic Joint Box, Fiber Cables Enclosures, Compact Fiber Optical Splice Closure Box, FTTH Splice Closure, Fiber Optic Splice Joint Closure, Plc Splitter/ Plc Splitter Box/Juction Box Fiber Odf Optic Closure, Small Fiber Optic Splice Closure, Fiber Optical Distribution Box, FTTH Fiber Optic Socket Face Plate, Fiber Optic Patch Panel, ODF Optical Fiber Distribution Frame, OCC Optical Fiber Cross Connection Cabinets, Network Cabinet, Equipment Enclosure, PLC Splitter, Patch cord, Adaptor, FTTH Accessories, etc.

Sijee Equipment Enclosure includes all kinds of Equipment Enclosure, wall mounting enclosure, junction box, network box, electrical enclosure box, stainless steel enclosure, electronic equipment racks, metal cabinets, metal enclosure CATV enclosure, etc.    

Sijee has a first-class sheet metal equipment workshop, and a special sheet metal product design department, the workshop has large laser cutting machines, CNC punching machines, CNC bending machine, CNC shears, robot automatic welding lines, automatic bending machine, variable pump injection molding machine with different tonnages, a number of standard assembly lines, with a strong sheet metal design and processing capacity, Sijee provides more than 800,000 various sheet metal cabinets and over 100 Million sets of fiber optic splice closures to domestic operators annually.

Sijee is equipped with a full set of advanced testing and test equipment and specialized testing laboratories. Sijee has good after-sales service, and always pursues the "quality to win the trust, honesty to pursue development" business philosophy to meet customer needs at best, as our unremitting efforts to the goal.