Horizontal 1X8 PLC Splitter Closure

MBN-FOSC-A9    Horizontal 1X8 PLC Splitter Closure

Horizontal 1X8 PLC Splitter Closure is designed for in-line application to provide a protected access point between the distribution cable and drop cable. This PLC splitter fiber optic termination box can keep internal components away from outdoor environmental damage. Its flexible configuration supports 2 cables in and 2 cables out. Cassette type optical splitter could be built-in. Good performance is useful in the harsh environment. The Horizontal 1X8 PLC Splitter Closure is suitable for the application on NAP in the distributed split PON architecture.

Specification:

Photos of MBN-FOSC-A9:

Features：

1. Outdoor application;
2. High structure material with UV resistant and good weather adaptability;
3. It can be installed one 1:8 Blockless PLC splitter;
4. 24cores Fusing Splice available;
5. 2*3mm drop cable both ends in and out;
6. The Fiber Optic Splitter Box is spacious enough for winding and storing fibers;
7. The mechanical sealing and advanced internal structure keep good sealing performance after re-entry and re-using;
8. Easy open and close of closure with a very little tool;
9. Suitable for bunchy fibers;
10. Aerial, wall-mounting;
11. Protection Grade: IP 65;
12. It’s especially applicable to FTTH optical fiber distribution;
13. Separate area for distribution cable and drop cable, easy for expansion and service provisioning.

Application:

1. CATV networks;
2. Optical fiber communication;
3. FTTX;
4. Fiber optic network convergence;
5. Optical fiber access network;
6. Widely used in FTTH access network;
7. Telecommunication networks;
8. Data communications networks;
9. Local area networks;
10. Aerial, Direct buried, underground, pipeline, hand-holes, duct mounting, wall mounting.